DKK-TOA WQC-30 User Manual

Model WQC-30 7.1 Operation screen maps
- 124 -
(3) Electrical conductivity operation screen map
[Setting Memory
Overwriting ON/OFF
Screen]
[Cell constant
calibration screen]
[Temperature
calibration screen]
[Calibration value
display screen]
[Setting Auto
Power Off Screen]
[Setting Old Unit
Screen]
[Setting buzzer
on/off Screen]
[Setting Data Number Screen]
[Date / Time Setting Screen]
Power on(ON)
[Memory Data Display Screen]
[Request memory data
Output/Delete screen]
Data continuous output
processing
[Electrical conductivity
measurement value
Screen]
(cond)
[Temperature Compensation
Setting Screen]
[Setting Range Screen]
“Setting Dissolved Oxygen
Measurements Screen”
POWER
・
・
/DATA IN
CLEAR CLEAR
CLEAR
CLEAR
CLEARCLEAR
CLEAR
CLEAR
MENU
MENU
MENU
◎When you press on this 8
screen, it returns directly to[Menu
Screen].
MENU
CLEAR
CLEARCLEAR
CLEAR
[Setting Interval Screen]
*
[Manual memory execution screen]
[Interval execution screen]
(Press for at least 2 seconds)
[Measurement
Screen]
(
Lights off)
(About1second display)
(Switching
measurement
types)
Interval
pending state*
(
Blinking)
(Suspend)
◎ If you press any screen (less than 2 seconds), return directly to the [Measurement screen].
Switching
measurement types
[Hold state]
(data must be saved.)
(
Lighting)
HOLD
(Switching measurement types)
When [Interval setting screen] is set to valid, it
becomes [Interval waiting state]. When it is set to
invalid (oFF), it returns to [measurement state].
＊
◎ When you press on this 4
screen, it returns directly to [measurement
state (or measurement waiting state)].
or
(Counter
clockwise)
(Blinking)
<Valid>
<Invalid>
[Menu Screen]
(Blinking)
(Blinking)
(Blinking)
(Blinking)
or
MENU CLEAR
or
MENU CLEAR
or
MENU CLEAR
or
MENU CLEAR
Electrical conductivity operation screen map

DKK-TOA WQC-30 Specifications

General

Brand	DKK-TOA
Model	WQC-30
Category	Measuring Instruments
Language	English