DKK-TOA WQC-30 User Manual

Model WQC-30 8.2 Printing with external printer
- 165 -
(2) Printing turbidity calibration values
The calibration data is automatically printed out when a calibration is completed. >>“6.2 Calibration of
Turbidity”
Example of printing turbidity zero calibration after calibration
Example of printing turbidity span calibration after calibration
You can print the set calibration data by pressing
on the control panel in the [Display
Calibration Value Screen] if there are the set zero or span calibration data. >>“6.2 (6) Turbidity
Calibration Data Check”.
Example of printing called turbidity calibration data

DKK-TOA WQC-30 Specifications

General

Brand	DKK-TOA
Model	WQC-30
Category	Measuring Instruments
Language	English