Model WQC-30 Introduction
-
1
-
Introduction
(a) Thank you for purchasing this product from our company. This “Model WQC-30 Handheld
Multi-Parameter Water Quality Meter” (referred to below as “the instrument” or “the product”) has a
waterproof construction suitable for performing on-site measurements, and is equipped with clock
functionality and data memory functionality essential for data management.
(b) By connecting the model WMS-30 standard accessory sensor module to the instrument unit,
multi-parameter water quality measurements can be made (if the order was for the instrument unit
only, the sensor module will not be included).
(c) Optional equipment includes the AC adapter, external printer, RS-232C connector cable and
submersible stirrer. The external printer prints measurement values and calibration values.
(d) The “Safety Information” section contains important information so please read it with particular
care. Furthermore, this instruction manual will be necessary should uncertainties arise during use so
please look after it carefully.
To Next Page
Loading...
Need help?
General