Appendix F XR150/XR350/XR550 User Guide 75
Cancelling an Alarm with Text Messaging
While the alarm bell or siren sounds, you may choose to cancel the
alarm via text messaging.
1. If a valid alarm has not occurred, text CANCEL to disarm the
system and cancel the alarm.
Turning Outputs On/Off/Momentary with Text Messaging
Allows you to set the state of any output to on, off, or momentary.
1. To set the Output to ON Steady, text ON followed by the
Output name or number. For example, to turn Output 3 on,
you would text: ON 3 or ON LIGHTS.
2. To turn the Output to OFF, text OFF followed by the Output
name or number. For example, to turn Output 3 off, you
would text: OFF 3 or OFF LIGHTS.
3
. To turn the Output to ON MOMENTARY (the output turns on
for one second, and then off), text MOMENTARY followed by
the Output name or number. For example, to turn Output 3
to momentary, you would text: MOMENTARY 3 or MOMENTARY
LIGHTS
.
Turning Lights On/Off with Text Messaging
Allows you to turn Z-Wave compatible lights on or off.
1.Toturnaspeciclighton,textTURNONfollowedbythelight
name. For example, to turn Bedroom Light on, you would
text: TURN ON BEDROOM LIGHT.
2. To turn a specic dimmer light on to a certain level, text
TURN ON followed by the light name and the dimmer level
(1-10). For example, to turn Front Dimmer Light on to level
8, you would text: TURN ON FRONT DIMMER 8.
3.To turn a specic lightoff,textTURN OFF followed by the
light name. For example, to turn Bedroom Light off, you
would text: TURN OFF BEDROOM LIGHT.
Locking/Unlocking Door Locks with Text Messaging
Allows you to lock/unlock Z-Wave compatible door locks.
1.Tolockaspeciclock,textLOCKfollowedbythelockname.
For example, to lock the Front Door, you would text: LOCK
FRONT DOOR.
2.Tounlockaspeciclock,textUNLOCKfollowedbythelock
name. For example, to unlock the Front Door, you would
text: UNLOCK FRONT DOOR.
Setting Thermostat with Text Messaging
Allows you to set Z-Wave compatible thermostats with
specictemperatures.
1. To set the thermostat to Cool or Heat with a specic
temperature, text SET followed by the thermostat name
followed by HEAT or COOL followed by the temperature. For
example, to turn Main Thermostat on to COOL and 65°, you
would text: SET MAIN THERMOSTAT COOL 65.
2. To set the thermostat to Auto with specic heat and cool
temperatures, text SET followed by the thermostat name
followed by AUTO followed by the high temperature and the
cool temperature. For example, to turn Main Thermostat on
to AUTO with temperatures of 80° and 60°, you would text:
SET MAIN THERMOSTAT AUTO 80 60.
3. To set the thermostat fan to Auto or On, text SET followed
by the thermostat name followed by FAN followed by ON or
AUTO. For example, to turn the Main Thermostat fan on, you
would text: SET MAIN THERMOSTAT FAN ON.
Activating Favorites with Text Messaging
Allows you to activate a Favorite of Z-Wave compatible devices.
1. To activate a Favorite, text ACTIVATE followed by the Favorite
name. For example, to activate the Favorite named House
Lights, you would text: ACTIVATE HOUSE LIGHTS.
To Next Page
Loading...
Need help?
General
