DMP Electronics XTLC User Manual

XTL/XTLC Programming Guide Digital Monitoring Products
5
INITIALIZATION
Initialization
2.1
INITIALIZATION
Initialization
This function allows you to set the panel’s programmed memory back to the factory
defaults in preparation for system programming.
After you select YES to clear a section of memory, the panel asks if you are sure you
want to clear the memory. This is a safeguard against accidently erasing part of your
programming. No memory is cleared from the programming until you answer YES to
the SURE? YES NO prompt.
CODES?
NO YES
SCHEDS?
NO YES
For each section of the panel program you
can initialize, a NO or YES option is provided.
Selecting YES advances you to
a confirmation prompt.
If you select YES, the panel initializes that section of
the program and advances you to the next prompt.
If you select NO, the panel advances you to the next
section prompt but does not initialize that section of
the program.
SURE?
YESNO
Selecting NO advances
you to the next prompt.
2.2
CODES? NO YES
SURE? YES NO
Clear All Codes
NO leaves existing user codes intact.
YES clears the user code memory and assigns the user code number 99 to user 30 on
the XTL/XTLC.
2.3
SCHEDS? NO YES
SURE? YES NO
Clear All Schedules
NO - Leaves existing schedules intact.
YES - Clears all schedules from panel programming.
2.4
EVENTS? NO YES
SURE? YES NO
Clear Events
NO leaves existing event memory intact.
YES clears all event memory currently held in the panel’s Display Events buffer.
2.5
ZONES? NO YES
SURE? YES NO
Clear Zone Programming
NO leaves existing zone information intact.
YES sets all zones in the system to * UNUSED *
2.6
COMM? NO YES
SURE? YES NO
Clear Communication
NO - Leaves existing communication and messaging programming intact.
YES - Clears communication and messaging programming to factory defaults.
2.7
DEFAULTS? NO YES
SURE? YES NO
Set to Factory Defaults
NO leaves the remainder of the existing panel programming intact.
YES sets the panel’s programming back to factory default selections and clears all
Z-Wave device programming and all Favorites from the panel. Selecting YES does
not clear the panel’s event memory, zone, user code information, or schedules.

DMP Electronics XTLC Specifications

General

Brand	DMP Electronics
Model	XTLC
Category	Control Panel
Language	English