DMP Electronics XTLC - Time Zone Changes

Digital Monitoring Products XTL/XTLC Programming Guide
16
SYSTEM OPTIONS
8.13
TIME CHG NO YES
Time Zone Changes
This option allows the panel to request automatic time changes from the DMP SCS-
1R Receiver. For the receiver to send time changes, it must be programmed to send
time changes and must be receiving time change updates from the host automation
computer at least every 24 hours. Default is YES.
HRS FROM GMT: 6
When time zone is programmed YES, enter the number (0-23) that indicates the
Greenwich Time zone (GMT) where the panel is located. The default is 6. See table
for GMT values.
GMT City/Time Zone GMT City/Time Zone
0 London, Monrovia, Lisbon, Dublin, Casablanca, Edinburgh 13 New Cadelonia
1 Cape Verde Island, Azores 14 Guam, Sydney
2 Mid-Atlantic, Fernando de Noronha 15 Tokyo, Seoul
3 Buenos Aires, Georgetown, Brasilia, Rio de Janeiro 16 Hong Kong, Singapore
4 Atlantic Time (Canada), Caracas, La Paz, Santiago 17 Bangkok, Hanoi
5 Eastern Time (US, Canada) Bogota, Lima, Arequipa 18 Dhaka, Almaty
6 Central Time (US, Canada), Mexico City, Saskatchewan 19 Islamabad, Karachi
7 Mountain Time (US, Canada), Edmonton 20 Abu Dhabi, Kazan
8 PacicTime(US,Canada),Tijuana 21 Moscow, Bagdad
9 Alaska 22 Eastern Europe
10 Hawaii 23 Rome, Paris, Berlin
11 Midway Island, Samoa
12 Fiji,MarshallIsland,Wellington,Auckland,Kwajalein,Kamchatka
8.14
TIME DSP NO YES
Time Display
YES allows the keypad to display the time and day in the Status List. When NO is
selected, time and day of the week are not displayed.
8.15
HOUSE CODE: -
House Code
A Wireless House Code between 1 and 50 is pre-programmed at the factory. To
change the house code, press a top row select key. Enter a House Code from 1 to
50 and press the CMD button. The XTL/XTLC automatically programs the house
code into the wireless transmitters when the unique transmitter serial number is
programmed into the panel. See Wireless programming in Zone Information. The
house code identies the panel, receiver, and transmitters to each other. When
operating, the receiver listens for transmissions that have the programmed house
code and transmitter serial number.
8.15.1
DET JAMNG NO YES
Detect Wireless Jamming
When enabled and the receiver detects jamming, a trouble or alarm message is
sent to the receiver and displays in the Status List. Select YES to enable jamming
messages to display in the Status List. Select NO to disable jamming messages.
Default is NO.
8.15.2 Wireless Audible Annunciation
Press any top row key to select the keypad buzzer annunciation method for wireless
low battery and missing messages.
• Select ANY to enable annunciation anytime.
• Select DAY to enable annunciation except during sleeping hours (9 PM to 9 AM).
• Select MIN (minimum) to annunciate only Fire zones during daytime hours (9 AM
to 9 PM). Default is DAY.
8.16
KPD PANCS NO YES
Enable Keypad Panic Keys
This option allows the two-button panic key operation selected at a keypad to send
the Panic, Emergency, or Fire message to the central station receiver. Select YES to
enable the two-button panic operation. To disable the two-button panic operation,
select NO. Default is YES.
ANY DAY MIN
WLS AUDIBLE: DAY