Digital Monitoring Products XTL/XTLC Programming Guide
12
Remote Options
6.1
REMOTE OPTIONS
Remote Options
This section allows you to enter the information needed for Remote Command/
Remote Programming operation via CELL communication. A description of the
Remote Options follows:
6.2
RMT KEY:
Remote Key
This option allows you to enter a code of up to eight digits for use in verifying
the authority of an alarm or service receiver to perform a remote command/
programming session. The receiver must give the correct key to the panel before
being allowed access. All panels are shipped from the factory with the Remote Key
preset as blank.
To enter a new Remote Key, press any Select key and enter any combination of up to
8 digits. The numbers you enter appear as asterisks. Press COMMAND.
6.3
DISARM NO YES
Remote Disarm
Enter YES to enable the panel to be disarmed remotely. Selecting NO disables
remote disarming.
REMOTE OPTIONS
To Next Page
Loading...
Need help?
General
