Hardware Architecture
1-2 72A-2337-01 Rev. B 11/05
Hardware Architecture
The F6300 High Power Current Amplifier (Figure 1.2) is designed to work in conjunction with
the F6150 Power System Simulator. The F6150 is responsible for the waveform generation. The
F6300 makes the control of the amplifiers available to the F6150 via the Ethernet link and the
low level input connection.
The components of the F6300 Instrument are:
• Front Panel
• CPU Board
• Analog Multiplexer board
• Six Current Amplifiers
• Power Supply
• Four Cooling Fans
Power Supply
Current Source
Current Source
Current Source
Current Source
Current Source
Analog Multiplexer
CPU
Comm.
Output Terminal Board & Display
Current Source
Fans
Figure 1.2 F6300 Components
To Next Page
Loading...
