F6300 Power System Simulator User Guide
72A-2337-01 Rev. B 11/05 1-3
Control Panel Version 2
The F6000 Control Panel Version 2 (Figure 1.3) controls the power system simulator from a
computer connected to the instrument’s front panel. It configures and controls the instrument’s
voltage sources, current sources, logic inputs, logic outputs, and timers. The F6000 Control Panel
Version 2 emulates front panel controls. It also employs flexible data entry procedures to
accommodate the wide range of test configurations possible. The Control Panel’s (Version 2)
intuitive controls can check a relay without an elaborate test plan.
A stand alone version of the Control Panel (Version 2) is shipped with each F6000 instrument.
Figure 1.3 F6000 Control Panel Version 2
To Next Page
Loading...
