Dormakaba c-lever pro - 5.9 Deleting Individual Master Bs

ProgrammingTechnical Manual
49HAC Standard fixing - 02/2018 dormakaba c-lever pro
5.9 Deleting individual Master Bs
Consequences
• The Master-B programmed under Master-A is deleted.
• All user media programmed under Master-B are deleted.
Procedure
1
1 s
Beep
Activate programming mode:
Hold Master A in front of the an-
tenna briefly (approx. 1s).
1 short signal sounds.
1 x short
10 s
2
Beep
Beep
Remove Master-B and all user me-
dia from the component:
Hold Master-B in front of the an-
tenna until two short signals sound.
(Green illuminates for as long as
Master-B is in the antenna field
and is being read.)
2 x short
3
Beeeep
1 s
Disable programming mode:
Hold Master A in front of the an-
tenna briefly (approx. 1s).
1 long signal sounds.
Note: If no master medium is held
up, programming mode is deactiv-
ated after 20s and one long signal
sounds.
Changes were implemented.
1 x long