Dormakaba c-lever pro User Manual

Service Technical Manual
60 HAC Standard fixing - 02/2018dormakaba c-lever pro
8.5 Configuration and traceback
For correct time management, the clock time and the date on the device must be up-to-date.
c-lever pro without wireless module:
Configuration, updates (e.g. of the clock time) and traceback read-outs are performed using
the programmer.
The traceback is transmitted from the programmer to the system software for evaluation.
See also > Programmer
8.6 Reset (INI reset)
Consequences of an INI reset
• All parameter settings and data are deleted and returned to their original values (factory
settings).
• The access point is blocked during the INI reset.
NOTICE
Loss of data
The INI reset deletes all settings and data saved on the device.
A reset can be performed in the following ways:
• With master media
See INI reset with master media for whitelist and CardLink™ [}5.11]
• With programmer 1460, see Reset with programmer 1460
• With tweezers, see Reset using tweezers
Also see about this
2 5.11 INI reset with master media for whitelist and CardLink™ [}51]
8.6.1 Reset with programmer 1460
Requirements
• A programmer 1460 is available.
• An authorised user medium or a master medium is available.
• The batteries are inserted.
8.6.1.1 Connecting the programmer
• Connect the c-lever and programmer using the programming cable and the adapter
(1355-42B) for the programmer cable (grey).
8.6.1.2 Carrying out a reset
• Hold an authorized user medium or master medium in front of the antenna.
• Open the Settings menu on the programmer.

Dormakaba c-lever pro Specifications

General

Brand	Dormakaba
Model	c-lever pro
Category	Door locks
Language	English