Dormakaba c-lever pro User Manual

OperationTechnical Manual
53HAC Standard fixing - 02/2018 dormakaba c-lever pro
6 Operation
This section describes operation of the product.
6.1 Operating TouchGo products
Operating TouchGo products with RCID
Products with RCID Firmware Data transmission used
TouchGo c-lever pro E310 RCID
TouchGo c-lever pro E110 RCID
See: dormakaba c-lever TouchGo operating instructions
Operating TouchGo products with RFID
Products with RFID Firmware Data transmission used
TouchGo c-lever pro E310 RFID
See next Chapter.
6.2 Opening with user media
Before being used for the first time, access authorisations for the relevant system software
must be transmitted to the User media.
2
1
2
Beep
1. Hold authorised user medium in front of the antenna of the
fitting.
-> The acoustic and visual signals
1
confirm access authorisation.
Note: The c-lever's opening time is limited; after this time has
elapsed, the c-lever closes automatically. Upon delivery, the opening
time is approx. 6 s, but this can be adjusted using the 1460 program-
mer or the system software.
2. Activate the lock by pushing the lever handle.
3. The door can be opened.

Dormakaba c-lever pro Specifications

General

Brand	Dormakaba
Model	c-lever pro
Category	Door locks
Language	English