4. Select Index number 1 to add an account for the router. Check Enable Dynamic DNS
Account, and choose correct Service Provider: dyndns.org, type the registered
hostname: hostname and domain name suffix: dyndns.org in the Domain Name block.
The following two blocks should be typed your account Login Name: test and Password:
test.
If User-Defined is specified as the service provider, the web page will be changed
slightly as follows:
Available settings are explained as follows:
Item Description
Enable Dynamic DNS
Account
Check this box to enable the current account. If you did
check the box, you will see a check mark appeared on the
Active column of the previous web page in step 2).
WAN Interface WAN1/WAN2/WAN3 or LTE/WAN4 First - While connecting,
the router will use WAN1/WAN2/WAN3 or LTE /WAN4 as the
To Next Page
Loading...
