Draytek Vigor2926L User Manual

Vigor2926 Series User’s Guide
247
MAC Address Filter Display all MAC addresses that are edited before.
Client’s MAC Address Manually enter the MAC address of wireless client.
Apply SSID After entering the client’s MAC address, check the box of the
SSIDs desired to insert this MAC address into their access
control list.
Attribute s: Isolate the station from LAN - select to isolate the
wireless connection of the wireless client of the MAC address
from LAN.
Add Add a new MAC address into the list.
Delete Delete the selected MAC address in the list.
Edit Edit the selected MAC address in the list.
Cancel Give up the access control set up.
OK Click it to save the access control list.
Clear All Clean all entries in the MAC address list.
After finishing all the settings here, please click OK to save the configuration.
I
I
I
I
I
I
-
-
1
1
-
-
5
5
W
W
P
P
S
S
WPS (Wi-Fi Protected Setup) provides easy procedure to make network connection between
wireless station and wireless access point (vigor router) with the encryption of WPA and
WPA2.
Info WPS is available for the wireless station with WPS supported.
It is the simplest way to build connection between wireless network clients and vigor router.
Users do not need to select any encryption mode and type any long encryption passphrase to
setup a wireless client every time. He/she only needs to press a button on wireless client, and
WPS will connect for client and router automatically.
There are two methods to do network connection through WPS between AP and Stations:
pressing the Start PBC button or using PIN Code.

Draytek Vigor2926L Specifications

General

Brand	Draytek
Model	Vigor2926L
Category	Network Router
Language	English