Vigor2926 Series User’s Guide
165
Available settings are explained as follows:
Item Description
Enable Check to enable TACACS+ feature.
Server IP Address Enter the IP address of TACACS+ server.
Destination Port The UDP port number that the TACACS+ server is using.
Shared Secret The TACACS+ server and client share a secret that is used to
authenticate the messages sent between them. Both sides
must be configured to use the same shared secret.
Confirm Shared Secret Re-type the Shared Secret for confirmation.
After finished the above settings, click OK button to save the settings.
To Next Page
Loading...
Need help?
General
