Vigor2926 Series User’s Guide
183
User Profile Select All – Click it to select all of the profiles under
Available List.
Clear All – Click it to remove all of the profiles under
Authentication List.
Sync User Profile …. Make the enabling/disabling setting for both Internal RADIUS
and Local 802.1X synchronize for all of the user profiles
(User Management>>User Profile).
For example, if Local 802.1x is configured as Enabled
(checked), the Internal RADIUS will be configured as Enabled
too.
If Local 802.1X is configured as Disabled (unchecked), the
Internal RADIUS will be changed as Disabled too, even if it is
enabled previously.
OK Click it to save the settings.
Clear Click it to remove previous setting configuration.
Cancel Click it to give up all settings configuration.
When you finish the configuration, please click OK to save and exit this page.
To Next Page
Loading...
