Vigor2926 Series User’s Guide
243
5 GHz in “ac” model:
Note: For the restricted channels on DFS, please refer to
4.18.1 Basic Concepts for more detailed information.
Hide SSID Check it to prevent from wireless sniffing and make it harder
for unauthorized clients or STAs to join your wireless LAN.
Depending on the wireless utility, the user may only see the
information except SSID or just cannot see any thing about
Vigor wireless router while site surveying. The system allows
you to set four sets of SSID for different usage. In default,
the first set of SSID will be enabled. You can hide it for your
necessity.
SSID Means the identification of the wireless LAN. SSID can be any
text numbers or various special characters.
Isolate Member –Check this box to make the wireless clients
(stations) with the same SSID not accessing for each other.
VPN – Check this box to make the wireless clients (stations)
with different VPN not accessing for each other.
Schedule Set the wireless LAN to work at certain time interval only.
You may choose up to 4 schedules out of the 15 schedules
pre-defined in Applications >> Schedule setup. The default
setting of this field is blank and the function will always
work.
Enable Special SSID
Schedule Profiles
Selected SSID (2 /3 /4) will be forced up /down based on the
schedule profile used.
To Next Page
Loading...
Need help?
General
