Vigor2926 Series User’s Guide
283
OP Number The front number you type here is the first part of the
account number that you want to execute special function
(according to the chosen mode) by using the prefix number.
Min Len Set the minimal length of the dial number for applying the
prefix number settings. Take the above picture (Prefix
Table Setup web page) as an example, if the dial number is
between 7 and 9, that number can apply the prefix number
settings here.
Max Len Set the maximum length of the dial number for applying
the prefix number settings.
Route Choose the one that you want to enable the prefix number
settings from the saved SIP accounts. Please set up one SIP
account first to make this interface available. This item
will be changed according to the port settings configured in
VoIP>> Phone Settings.
Move UP /Move Down Click the link to move the selected entry up or down.
After finishing all the settings here, please click OK to save the configuration.
To Next Page
Loading...
Need help?
General
