function of SSL 3.0/1.0/1.1/1.2 if required.
Due to security consideration, the built-in HTTPS and SSL
VPN server of the router had upgraded to TLS1.x protocol. If
you are using old browser(eg. IE6.0) or old SmartVPN Client,
you may still need to enable SSL 3.0 to make sure you can
connect, however, it's not recommended.
CVM Access Control CVM Port – Check the box to enable such port setting.
CVM SSL Port – Check the box to enable such port setting.
AP Management Enable AP Management – Check it to enable the function of
Central Management>>AP. If unchecked, menu items
related to Central Management>>AP will be hidden.
Device Management Check the box to enable the device management function for
Vigor2926.
Respond to external device – If it is enabled, Vigor2926 will
be regarded as slave device. When the external device
(master device) sends request packet to Vigor2926,
Vigor2926 would send back information to respond the
request coming from the external device which is able to
manage Vigor2926.
After finished the above settings, click OK to save the configuration.
F
F
o
o
r
r
I
I
P
P
v
v
6
6
Available settings are explained as follows:
Item Description
To Next Page
Loading...
Need help?
General
