configuration backup of the selected CPE.
Config Restore – It means such profile will be used for
restoring the configuration of the selected CPE.
Info
When restoring configuration to a CPE,
make sure the configuration file you
selected was backup from this CPE before.
Because restoring from another device's
configuration file may cause serious
problem (e.g., Both devices have different
ISP username/ password. Restoring
configuration from one CPE to the other will
cause Internet connection not being
online).
Firmware Upgrade – It means such profile will be used
for firmware upgrade.
File/Path Click Select to locate the file you want to save, restore or
upgrade for CPE.
Index in Schedule Vigor2926 series will perform the specified action to the
selected CPE based on the schedule configured here.
Specify one or two schedule profiles (represented by number)
here.
3. Enter all the settings and click OK.
4. A new maintenance profile has been created.
To Next Page
Loading...
Need help?
General
