Available settings are explained as follows:
Item Description
Group Name Type a name as the group name. Different switches can be
classified within a group.
Group Password Type a password that administrator can use to access into
the managed VigorSwitch connecting to Vigor2926 series. All
of the switches under the same group can be accessed into
via such group password.
Existing Switch Display all of the VigorSwitch devices connecting to
Vigor2926.
Member Switch Choose the switches you want to group and click the button
“>>” to move the selected devices onto the field of Member
Switch. Devices under Member Switch will be grouped under
such group profile.
OK Click it to save the configuration.
Cancel Click it to exit the setting page without saving any change.
To Next Page
Loading...
Need help?
General
