2. The configuration page will be shown as follows:
Available settings are explained as follows:
Item Description
Profile Name Type a name for such notification profile. The maximum
length of the name you can set is 15 characters.
Category Display the types that will be monitored.
Status Display the status for the category. You can check the box to
be monitored.
For example, the check box of CPE firmware upgrade fail
under the category of Central VPN Management is checked.
Once such profile is enabled, Vigor router system will send
out notification to the recipient via SMS.
3. After finishing all the settings here, please click OK to save the configuration.
To Next Page
Loading...
Need help?
General
