Available settings are explained as follows:
Item Description
Enable Data Flow Monitor Check this box to enable this function.
Refresh Seconds Use the drop down list to choose the time interval of
refreshing data flow that will be done by the system
automatically.
Refresh Click this link to refresh this page manually.
Index Display the number of the data flow.
IP Address Display the IP address of the monitored device.
TX rate (kbps) Display the transmission speed of the monitored device.
RX rate (kbps) Display the receiving speed of the monitored device.
Sessions Display the session number that you specified in Limit
Session web page.
Action Block - can prevent specified PC accessing into Internet
within 5 minutes.
To Next Page
Loading...
Need help?
General
