0 – Disable
1 - Enable
-p <path> Determines the block path.
1:in_url,
2:in_number
3:out_url,
4:out_number
5:(in & out)_url,
6:(in & out)_number) )
-n <number> Determines the block number (maximum 29 characters).
-d <domain> Block the specified domain.
-i <inf> Block the specified interface(s) or All interfaces.
-s <Schedule> Specify schedule profiles by indicating the index number of the
schedule profile. Four schedule profiles can be used at one time.
-w Delete the selected entry. N=null (clear all)
-v List current settings.
voip dialplan phonebook
n It means the index number of the VoIP settings.
n=1 ~ 60
-<command><parameter> The available commands with parameters are listed below.
-d <number> Specify the speed dial number.
-c <url> Contact SIP URL l(max. 59 characters)
-n <name> Contact name (max. 23 characters)
-a <enable> Enable/disable the specify entry.
-m <mode> Specify backup number mode.
0 – none
2 - PSTN
-b <number> Spedify the backup number.
-o <acc num> Specify the dial out account.
0 – default
1 - acc1, 2 - acc2... ~ 12:=acc12
-z <enable> Enable/disable ZRTP/SRTP VoIP security.
1 – enable
0 - disable
-l Delete the specify entry.
-V List current VoIP settings.
voip dialplan region
-e Dnable or disable the regional function.
1 – enable
0 - disable
-m <number> Return the last miss call.
-I <number> Return the last incoming call.
-o <number> Return the last outgoing call.
-F <number> Hotkey to enable call forwarding (all) function.
-f <number> Hotkey to enable call forwarding (busy) function.
To Next Page