[4] – The forth number means the limit num of station.
Available range is 3~64.
[5] – The fifth number means the upload limit function. Type
1 – enable upload limit,
0 – disable upload limit.
[6] – The sixth number means the download limit function.
Type
1 – enable download limit,
0 – disable download limit.
[7] – The seventh number means disassociation by idle time.
Type
1 – enable disassociation,
0 – disable disassociation.
[8] – The eighth number means to enable or disable disassociation
by signal strength. Type
1 – enable disassociation,
0 – disable disassociation.
[9] – The ninth number means to determine the unit of traffic
limit (for upload)
1 – Mbps
0 – kbps
[10] – The tenth number means to determine the unit of traffic
limit (for download)
1 – Mbps
0 – kbps
E
E
x
x
a
a
m
m
p
p
l
l
e
e
> apm lbcfg show
apm LoadBalance Config :
1. Enable LoadBalance : 0
2. Enable station limit : 0
3. Enable traffic limit : 0
4. limit Number : 64
5. Upload limit : 0
6. Download limit : 0
7. Enable disassociation by idle time : 0
8. Enable disassociation by Signal strength : 0
9. Traffic limit unit (upload) : 0
10.Traffic limit unit (download) : 0
flag : 0
> apm lbcfg set 1 1 0 15 0 0 0 0 1 1
> apm lbcfg show
apm LoadBalance Config :
1. Enable LoadBalance : 1
2. Enable station limit : 1
3. Enable traffic limit : 0
4. limit Number : 15
5. Upload limit : 0
6. Download limit : 0
7. Enable disassociation by idle time : 0
8. Enable disassociation by Signal strength : 0
9. Traffic limit unit (upload) : 1
To Next Page
Loading...
