Draytek Vigor2926L - Page 956

Vigor2926 Series User’s Guide
940
swm alert set [Idx] log [e/d]
swm alert set [Idx] name [name]
swm alert set [Idx] color [O/R/N]
swm alert set [Idx] notif [e/d]
swm alert set [Idx] obj [object idx] [object value]
swm alert display
swm alert en/dis [sw/port] [mac]
swm alert sw show [mac]
swm alert set sw [mac] [incident idx] [level idx]
swm alert port show [mac]
swm alert set port [mac] [port num][incident idx] [level idx]
S
S
y
y
n
n
t
t
a
a
x
x
D
D
e
e
s
s
c
c
r
r
i
i
p
p
t
t
i
i
o
o
n
n
Parameter Description
enable/disable Enable/disable alert mechanism.
show Display all alert setup information.
en/dis [Idx] Enable/disable alert action for certain profile.
Idx – Indicate profile to be configured; available range: 1 – 8.
set [idx] log [e/d] Enable/disable log action for certain profile.
Idx – Indicate profile to be configured; available range: 1 – 8. 8.
e/d – Enable/disable the profile.
set [idx] name [name] Set level name which can represent different severiy level.
Idx – Indicate profile to be configured; available range: 1 – 8.
name – Type a string to indicate the severity level.
set [idx] color [O/R/N] Set color for alert for certain profile.
Idx – Indicate profile to be configured; available range: 1 – 8.
O/R/N – O means orange; R means red; N means white
set [idx] notif [e/d] Enable/disable the notification action for certain profile.
Idx – Indicate profile to be configured; available range: 1 – 8.
e/d - Enable/disable the mechanism for sending the notification.
set [idx] obj [object idx]
[object value]
Set notifiction by SMS or E-mail thorugh the object profile selelcted
for specified profile.
Idx – Indicate profile to be configured; available range: 1 – 8.
object idx - Available range: 1 – 4
object value – Available range: 1 – 20
swm alert display Display all switch and port alert state.
en/dis [sw/port][mac] Enable/disable Switch/Port Action.
sw/port – Type a port number for VigorSwitch.
mac – Type MAC address of the VigorSwitch.
sw show [mac] Display VigorSwitch Incident Alert
set sw [mac] [incident idx]
[level idx]
Set incident alert for VigorSwitch.
mac- Type MAC address of the VigorSwitch.
level idx – Available range: 1 – 8. Each number represents different
severity level.
port show [mac] Display the incident alert setting for all LAN ports of certain
VigorSwitch (specified by MAC address).
Mac – Type the MAC address of the VigorSwitch.
set port [mac] [port
num][incident idx][level idx]
Set incident alert for each Ethernet port of VigorSwitch.
mac- Type MAC address of the VigorSwitch.
port num – Type a port number for VigorSwitch.