4
Wireless band will be switched /changed
according to the button pressed and released.
For example,
2.4G (On) and 5G (On) – in default.
2.4G (Off) and 5G (On) – pressed and
released the button once.
2.4G (On) and 5G (Off) – pressed and
released the button twice.
2.4G (Off) and 5G (Off) – pressed and
released the button three times.
WPS - When WPS function is enabled by web
user interface, press this button for more than 2
seconds. The router will wait for any wireless
client connecting to it through WPS.
Restore the default settings. Usage: Turn on the
router. Press the button and keep for more than
10 seconds. Then the router will restart with the
factory default configuration.
LAN B
Connecter for xDSL / Cable modem (Giga level)
or router.
LAN A4, A3, A2
A1 (PoE)
Connecter for xDSL / Cable modem (Giga level) /
computer or router.
LAN A1 is used for PoE connection (for indoor
use).
PWR: Connecter for a power adapter.
Connecter for a USB device (for temperature
sensor).
Power switch.
Note:
For the sake of security, make the accessory kit away from children.
To Next Page
Loading...
