65
II-3-13 Station List
Station List provides the knowledge of connecting wireless clients now along with its status code. Each
tab (general, advanced, control, neighbor) will display different status information (including MAC address,
Vendor, SSID, Auth, Encrypt, Tx/Rx Rate, Hostname, RSSI, Link Speed, BW, PSM, WMM, PHMd, MCS,
Connection Time, Reconnection Time, Approx. Distance, Visit Time, and so on).
General
Display general information (e.g., MAC Address, SSID, Auth, Encrypt, TX/RX Rate) for the station.
Available settings are explained as follows:
Item Description
MAC Address Display the MAC Address for the connecting client.
Hostname Display the host name of the connecting client.
SSID Display the SSID that the wireless client connects to.
Auth Display the authentication that the wireless client uses for connection with
such AP.
Encrypt Display the encryption mode used by the wireless client.
Tx Rate/Rx Rate Display the transmission /receiving rate for packets.
Refresh Click this button to refresh the status of station list.
Add to Access Control Client’s MAC Address - For additional security of wireless access, the
Access Control facility allows you to restrict the network access right by
controlling the wireless LAN MAC address of client. Only the valid MAC
address that has been configured can access the wireless LAN interface.
Add Click this button to add current typed MAC address into Access Control.
Advanced
Display more information (e.g., AID, PSM, WMM, RSSI PhMd, BW, MCS, Rate) for the station.
To Next Page
Loading...
Need help?
General
