94
III-1-5 Configuration Backup
Such function can be used to backup/restore the VigorAP 903 settings.
Available settings are explained as follows:
Item Description
Restoration Upload - Click it to specify a file to be restored.
Password (optional) – Enter a password for configuration restoration.
Restore – Click it to restore the configuration file to VigorAP.
Backup Perform the configuration backup of this device.
Protect with password- For the sake of security, the configuration file
for the access point can be encrypted.
Password – Type several characters as the password for encrypting the
configuration file.
Confirm Password – Type the password again for confirmation.
Backup – Click it to backup the configuration file.
Follow the steps below to backup your configuration.
1. Go to System Maintenance >> Configuration Backup.
2. If required, check the box of Protect with password and enter the password.
3. Click Backup to get into the following dialog.
To Next Page
Loading...
