Draytek VigorAP 903 User Manual

15
I-4 Accessing to Web User Interface
All functions and settings of this access point must be configured via web user interface. Please start your
web browser (e.g., Firefox).
1. Make sure your PC connects to the VigorAP 903 correctly.
2. Open a web browser on your PC and type http://192.168.1.2. A pop-up window will open to ask
for username and password. Pease type “admin/admin” on Username/Password and click OK.

Note:
You may either simply set up your computer to get IP dynamically from the router or set up the IP address
of the computer to be in the same subnet as the IP address of VigorAP 903.
 If there is no DHCP server on the network, then VigorAP 903 will have an IP address of 192.168.1.2.
 If there is DHCP available on the network, then VigorAP 903 will receive it’s IP address via the DHCP
server.
 If you connect to VigorAP by wireless LAN, you could try to access the web user interface through
http://vigorap.com.

Draytek VigorAP 903 Specifications

General

Brand	Draytek
Model	VigorAP 903
Category	Wireless Access Point
Language	English