Draytek VigorAP 903 User Manual

VigorAP 903 User’s Guide
136
V-2 Checking the Hardware Status
Follow the steps below to verify the hardware status.
1. Check the power line and cable connections.
Refer to “I-2 Hardware Installation” for details.
2. Power on the modem. Make sure the POWER LED, ACT LED and LAN LED are bright.
3. If not, it means that there is something wrong with the hardware status. Simply back to “I-2
Hardware Installation” to execute the hardware installation again. And then, try again.

Draytek VigorAP 903 Specifications

General

Brand	Draytek
Model	VigorAP 903
Category	Wireless Access Point
Language	English