44
II-3-2 Security
This page allows you to set security with different modes for SSID 1, 2, 3 and 4 respectively. After
configuring the correct settings, please click OK to save and invoke it.
By clicking the Security Settings, a new web page will appear so that you could configure the settings.
Available settings are explained as follows:
Item Description
Mode There are several modes provided for you to choose.
Disable - The encryption mechanism is turned off.
WEP - Accepts only WEP clients and the encryption key should be entered
in WEP Key.
WPA/PSK or WPA2/PSK or Mixed (WPA+WPA2)/PSK - Accepts
only WPA clients and the encryption key should be entered in PSK. The
WPA encrypts each frame transmitted from the radio using the key, which
either PSK (Pre-Shared Key) entered manually in this field below or
automatically negotiated via 802.1x authentication.
WEP/802.1x - The built-in RADIUS client feature enables VigorAP 903 to
assist the remote dial-in user or a wireless station and the RADIUS server
in performing mutual authentication. It enables centralized remote access
authentication for network management.
The WPA encrypts each frame transmitted from the radio using the key,
To Next Page
Loading...
Need help?
General
