98
III-1-8 SNMP
This page allows you to configure settings for SNMP and SNMPV3 services.
The SNMPv3 is more secure than SNMP through the authentication method (support e.g., MD5) for the
management needs.
Available settings are explained as follows:
Item Description
Enable SNMP Agent Check it to enable this function.
Enable SNMPV3 Agent Check it to enable this function.
USM User USM means user-based security mode.
Type a username which will be used for authentication. The maximum
length of the text is limited to 23 characters.
Auth Algorithm Choose one of the encryption methods listed below as the authentication
algorithm.
Auth Password Type a password for authentication. The maximum length of the text is
limited to 23 characters.
Click OK to save these settings.
To Next Page
Loading...
