79
II-5 Universal Repeater Settings for Range Extender Mode
When you choose Range Extender as the operation mode, the Wireless LAN menu items (for 2.4GHz and
5GHz) will include General Setup, Security, Access Control, WPS, Advanced Setting, AP Discovery, WDS AP
Status, Universal Repeater, Bandwidth Management, Airtime Fairness, Station Control, Roaming, Band
Steering and Station List.
This section will introduce settings for Universal Repeater only.
For other wireless setting items (e.g., General Setup, Security, WPS, and etc.), please refer to II-3.
The following figure shows how VigorAP runs as Range Extender:
The access point can act as a wireless repeater; it can be Station and AP at the same time. It can use
Station function to connect to a root AP and use AP function to serve all wireless stations within its
coverage.
Note:
To Next Page
Loading...
