106
Add Add a new MAC address into the White List/Black List.
Delete Delete the selected MAC address in the White List/Black List.
Edit Edit the selected MAC address in the White List/Black List.
Cancel Give up the configuration.
Click OK to save these settings.
III-2-4 Status of Settings
Load Balance can help to distribute the traffic for all of the access points (e.g., VigorAP 903s) registered to
Vigor 2860 or Vigor2925 series. This web page displays the settings related to Load Balance for VigorAP
903. In which, By Station Number, By Traffic and Force Overload Disassociation indicate settings
configured in Vigor 2860 or Vigor2925 series.
“X” means the function is not enabled or VigorAP 903 has not registered to any Vigor router yet.
Below shows a setting example for Load Balance settings configured in Vigor 2860 or Vigor2925 series.
To Next Page
Loading...
