57
II-3-10 Station Control
Station Control is used to specify the duration for the wireless client to connect and reconnect VigorAP. If
such function is not enabled, the wireless client can connect VigorAP until it shuts down.
Such feature is especially useful for free Wi-Fi service. For example, a coffee shop offers free Wi-Fi service
for its guests for one hour every day. Then, the connection time can be set as “1 hour” and reconnection
time can be set as “1 day”. Thus, the guest can finish his job within one hour and will not occupy the
wireless network for a long time.
Note:
Up to 300 Wireless Station records are supported by VigorAP.
Available settings are explained as follows:
Item Description
SSID Display the SSID that the wireless station will use it to connect with Vigor
router.
Enable Check the box to enable the station control function.
Connection Time /
Reconnection Time
Use the drop down list to choose the duration for the wireless client
connecting /reconnecting to Vigor device. Or, type the duration manually
when you choose User defined.
Display All Station
Control List
All the wireless stations connecting to Vigor router by using such SSID will
be listed on Station Control List.
After finishing all the settings here, please click OK to save the configuration.
To Next Page
Loading...
Need help?
General
