119
IV-2-3 Wi-Fi Auto On/Off
When VigorAP is able or unable to ping the specified host, the Wi-Fi function will be turned on or off
automatically. The purpose of such function is to avoid wireless station roaming to an AP which is unable to
access Internet.
Available settings are explained as follows:
Item Description
Enable Auto Switch
On/Off Wi-Fi
Check the box to enable such function.
Ping Host Type an IP address (e.g., 8.8.8.8) or a domain name (e.g., google.com) for
testing if the access point is stable or not.
Click OK to save the settings.
To Next Page
Loading...
