38
It is the simplest way to build connection between wireless network clients and VigorAP 903. Users do not
need to select any encryption mode and type any long encryption passphrase to setup a wireless client
every time. He/she only needs to press a button on wireless client, and WPS will connect for client and
VigorAP 903 automatically.
Note:
Such function is available for the wireless station with WPS supported.
There are two methods to do network connection through WPS between AP and Stations: pressing the
Start PBC
button or using
PIN Code
.
On the side of VigorAP 903 series which served as an AP, press WPS button once on the front panel of
VigorAP 903 or click Start PBC on web configuration interface. On the side of a station with network card
installed, press Start PBC button of network card.
If you want to use PIN code, you have to know the PIN code specified in wireless client. Then provide the
PIN code of the wireless client you wish to connect to the VigorAP 903.
To Next Page
Loading...
Need help?
General
