Draytek VigorAP 903 User Manual

51
IP
If it is enabled, VigorAP will isolate different wireless clients according to
their IP address(es).
WMM Capable
To apply WMM parameters for wireless data transmission, please click the
Enable radio button.
MAC Clone Click Enable and manually enter the MAC address of the device with SSID
1. The MAC address of other SSIDs will change based on this MAC address.
After finishing this web page configuration, please click OK to save the settings.

Draytek VigorAP 903 Specifications

General

Brand	Draytek
Model	VigorAP 903
Category	Wireless Access Point
Language	English