70
When Mesh Node is
selected
Wired Uplink – Check the box if such VigorAP connects to an uplinked
mesh root or an uplinked mesh node with an Ethernet cable.
Wireless Uplink Band – Choose a wireless band for connecting with an
uplinked mesh root or an uplinked mesh node.
Log Level – Choose Basic or Detailed. Related information will be
shown on the Diagnostics>>System Log.
Mesh Group When such VigorAP is set as mesh root or is added to a mesh group, the
basic information including role, MAC address, and model name of the AP
will be shown in this area.
Up to 8 entries (one mesh root and seven mesh nodes) will be shown on
this field.
Reset Click it to clear the Mesh Group information.
Add Mesh Node Click Search to find out available mesh node on the network.
Check the one you want and click Apply. The selected AP will be added
onto current mesh root.
Backup Mesh Config Backup – Click the button to save the configuration as a file.
Upload/Restore – Click the Upload button to specify a configuration file.
Then click Restore to apply the configuration.
When the MAC address of such VigorAP does not appear under the mesh
group, the restore operation will not succeed and the error
message, ”Device MAC is not in mesh group list”, will be shown instead.
To Next Page
Loading...
Need help?
General
