DSC Neo User Manual

Section 6: Programming Worksheets
616
Record Time:
3-digit entry
Default: 105
617
Erase Time:
2-digit entry
Default: 15 minutes
620
Audio Station Tamper Option 1: 1 - o Audio Station 1 Tamper
2 - o Audio Station 2 Tamper
3 - o Audio Station 3 Tamper
4 - o Audio Station 4 Tamper
5 - o Future Use
6 - o Future Use
7 - o Future Use
8 - o Future Use
999
Reset Module Programming to Factory Defaults 999 installer code 999
6.15 Wireless Programming
[804] Wireless Programming
See the HSM2HOSTx installation manual and wireless device installation sheets for detailed information.
000 – WLS Device Enrollment Zones: (Selection) Zone #:
Zone Definition:
(2-digit decimal) Partition Assignment:
(14 x 2) Zone Label:
This section is an overview of wireless device programming.
See the associated device installation sheets and the
HSM2HOST/RFK keypad installation instructions for
detailed worksheets
WLS Keys (Selection) WLS Key #:
(2-digit decimal) Partition Assignment:
(Selection) Select User:
WLS Key Label:
Sirens (Selection) Siren #:
(2-digit decimal) Partition Assignment:
(14 x 1) Siren Label:
Keypads (2-digit
decimal)
Keypad #:
(2-digit decimal) Partition Assignment:
Keypad Label:
Repeaters (Selection) Repeater #:
Repeater Label:
001- 128 Configure Wireless Zones 1 to 128
551-556 Configure Wireless Sirens 1-16
601-632 Configure Wireless Keys 1-32
- 177 -

DSC Neo Specifications

General

Model	DSC Neo
Category	Security System
Partitions	Up to 8
Type	Hybrid Security System
Zones	Up to 128 zones
Communication	Cellular, IP
Compatibility	PowerG wireless sensors
Remote Access	Yes, via app
PGMs	4
Wireless Range	Up to 2 km with PowerG
Event Buffer	1000 events
Wireless Frequency	433 MHz, 868 MHz
Power Supply	16.5VAC, 40VA
Battery Backup	Yes, 12VDC 7Ah
Operating Temperature	0°C to 49°C (32°F to 120°F)
Event Log	Yes