DSC Neo User Manual

Contents
Section 1: Introduction 7
1.1 About the System 7
Section 2: Installation 12
2.1 Overview of Installation Process 12
2.2 Alarm Controller Installation 12
2.3 Wiring 13
2.4 Installing Modules 18
Section 3: Configuration 29
3.1 Basic Configuration Steps 29
3.2 Using the Keypad 29
3.3 Enrollment 30
3.4 Working with Partitions 32
3.5 Trouble Indicators 33
3.6 Keypad Partition Setup 33
3.7 Alternate Communicator Setup 35
3.8 Local Firmware Upgrade 36
3.9 Testing the System 36
Section 4: System Operation 37
4.1 Arming and Disarming 37
4.2 Partition vs. Global Keypad 37
4.3 Labels 38
4.4 Annunciation 39
4.5 Keypad Function Keys 39
4.6 Language Selection 42
4.7 [*] Commands 42
4.8 SMS Command and Control 55
4.9 Visual Verification 56
Section 5: Programming 57
5.1 How to Program 57
5.2 Programming Methods 57
5.3 Programming Descriptions 61
Section 6: Programming Worksheets 122
6.1 Label Programming 122
6.2 Zone Setup 127
6.3 System Times 130
6.4 Access Codes 132
6.5 PGM Programming 132
6.6 System Lockout 145
6.7 System Options 145
6.8 Auto-Arm/Disarm 150
6.9 Partition and Zone Assignment 154
6.10 Communications 156
6.11 DLS Programming 166
- 4 -

DSC Neo Specifications

General

Model	DSC Neo
Category	Security System
Partitions	Up to 8
Type	Hybrid Security System
Zones	Up to 128 zones
Communication	Cellular, IP
Compatibility	PowerG wireless sensors
Remote Access	Yes, via app
PGMs	4
Wireless Range	Up to 2 km with PowerG
Event Buffer	1000 events
Wireless Frequency	433 MHz, 868 MHz
Power Supply	16.5VAC, 40VA
Battery Backup	Yes, 12VDC 7Ah
Operating Temperature	0°C to 49°C (32°F to 120°F)
Event Log	Yes