1-13
Chapter1 Before Operation
6. Handling Paper
6-1. Paper used
• Make sure that the printing ink on the paper has dried completely prior to use.
• Wet ink or ink that is not completely dried may stain the folding roller causing trouble such
as smearing on paper.
• Use of paper printed with special types of ink may cause the folding roller to swell or deform,
and folding misalignment may occur.
• Paper may not be fed smoothly into the folding plate or deformed folding may occur depending on
dierent environmental factors (temperature, humidity), paper ream weight, paper type, paper grain
direction if curled paper is used. Make sure to atten curled paper or paper with folded lines before
use.
• Separate the sheets of paper well before
stacking them.
To Next Page
