1-14
Chapter1 Before Operation
6-2. Precautions on stacking paper
Paper feed tray
Paper
Striking
Shutter
paper
detecting
sensor
• Stack paper striking the leading edge of paper
lightly at the shutter.
If there is some clearance between the
leading edge of paper and shutter, the
paper detecting sensor does not function
properly.
• Do not stack the sheets of paper on the paper
feed tray with the sides of sheets unaligned or
some sheets protruding from the stack.
Processing with sheets unaligned on the
right or left side may cause such trouble as
folding misalignment and jamming.
• Do not stack paper on the paper feed tray with
the lead and trail edges unaligned or some
sheets protruding out.
Processing with sheets unaligned on the
lead and trail edges may lead to unstable
feed causing such trouble as mis-feed and
double-feed.
To Next Page
Loading...
Need help?
General
