4-1
Chapter 4 Cleaning the Unit
Chapter 4 Cleaning the Unit
• Make sure that you disconnect the power cord from the wall outlet before cleaning.
• Before you use the machine after cleaning, make sure that its surface is completely dry.
Do not use ammable sprays and solvents during cleaning, etc. of internal
parts of the machine and in the vicinity of the machine.
Doing so could cause build-up of gas inside the machine, which in turn could
cause ignition, resulting in re and explosion.
When using alcohol, exercise precaution against re and ventilate well, and
after use, store in a safe place.
Use of other solvents may damage the rubber rollers and resin inside the machine,
resulting in malfunction.
1. Cleaning the folding roller and conveyance roller
1
Remove the folding plate 1.
Attach the folding plate 1 holding with
both hands.
2
Open the top cover.
Open or close the top cover
gently.
Hands or ngers may be caught in the
cover section. Doing so may result in
injury.
To Next Page
