Duplo DF-1200 - Test Feed Setting

3-27
Chapter 3 Advanced Operation
297 148.5/
A4 +0.0/
Ready
Ready
0
0
[Last Fold]
[Stopper Fixed]
8
Press the key.
Returns to the top screen.
When [Last Fold] or [Stopper Fixed] is set, an
icon will be displayed on the LCD display.
When the [Stopper Fixed] is set, folding misalignment in the vertical direction occurs by
removing the folding plate with the power turned o. Be sure to press the cancel key and clear
key at the same time when turning on the power so that the forcible ejection will be performed.
7-8. Test feed setting
The number of sheets that are fed for test feeding can be changed.
Other Setting1/5
Feed Interval
Stack Roll Adj
Belt Convey Vol
1
Press the menu key to display [Other
Setting].
Other Setting2/5
Oper Mode
Test Feed Set
Power Save Set
2
Select [Test Feed Set] with the or
key.
Test Feed Set
2
No of Sht
3
Press the key.
The [Test Feed Set] screen is displayed.
4
Press the key.
At this stage the numerical value can be changed.
Test Feed Set
3
No of Sht
5
Select the number of sheets with the
or
key.
Selected range : 1 to 3 sheets
6
Press the key.
The selected numerical value is set.
7
Press the key.
Returns to [Other Setting].
8
Press the key.
Returns to the top screen.