2-5
Chapter 2 Basic Operation
Do not put ngers inside during operation.
Keep away long hair, ties, jewelry and loose clothing.
It could cause injury.
When using a DF-980, start folding operations from the step 2.
When using a DF-970, start with the steps 1, and move on to the step 3.
1
Select the size of standard paper used
with paper size select key.
A4 +0.0/
Ready
0
2
Check the paper size display.
The paper size is not displayed if the paper
feed guide is not positioned as specied even
though the size of standard paper is used. If
not, reset the paper feed guide to a correct
position. (DF-980)
Automatic detection of standard paper size (DF-980)
When paper for all paper sizes is stacked in the
machine direction shown in the gure, paper
is detected as standard paper.
When paper of standard paper size is
stacked on the paper feed tray in the
sideways, the paper size is detected as
wrong paper size. Use paper as non-
standard paper when stacking paper in the
sideways.
For the use of non-standard paper, refer
to Chapter 3 “2. Standard Folding of Non-
Standard Paper” (p.3-7).
3
Press the folding mode key to select the
folding mode.
To Next Page
Loading...
Need help?
General
