Duplo DF-970 User Manual

2-8
Chapter 2 Basic Operation
A4 +0.0/ A4 +0.0/
Ready Ready
0
100
Count up Count down
10
Select the method of using the counter.
• The counter can be used in two ways
"Count Down" and "Count Up".
Count down : Enter the number of sheets
to be processed on the
keypad to start operation.
Count up : Press the clear key and set
the counter to “0” to start
operation.
• Up to four digits (9999) can be displayed.
• An icon will be displayed by pressing the start key.
Count up
When pressing the clear key, the buzzer sounds “pi”, and the count display will return to [0].
When pressing the start key without pressing the clear key, paper folding operation will restart and the
number of sheets processed will be counted up.
The machine will stop operations when the count display shows [9999]. Press the clear key to return
the count display to [0] and press the start key when processing paper folding continuously.
Count down
The machine will stop when the number of sheets set for processing is processed, and the count
display will return to the number of sheets set for processing.
When pressing the clear key, the buzzer sounds “pi”, and the use of the counter will return to "Count
up" instead of "Count down".
The count display will return to [0].
When pressing the start key without pressing the clear key, paper folding operation will restart and the
number of sheets processed will be counted down.
After that, the procedures vary depending on the use of the counter.
For counting down, refer to procedure 11.
For counting up, refer to procedure 12.
11
Press the keypad to enter the number
of sheets to be processed.
12
Press the start key to start folding.
• Press the stop key to interrupt or stop
operation. Press the start key again to
restart operation.
• When paper stacked on the paper feed
tray runs out, the machine will stop
automatically, and [No Paper] will be
displayed on the LCD display. When paper
is stacked on the paper feed tray, the
display of [No Paper] will disappear, and
the machine will be in the stand-by state.
• When double-feed or paper size error occurs during folding operation, the fed paper is processed
and ejected, but the number of processed sheets will not be counted.
• When paper jams at the ejection section, the paper detected as paper jam will be counted, but the
following paper will not be counted.

Duplo DF-970 Specifications

General

Brand	Duplo
Model	DF-970
Category	Folding Machines
Language	English