Multi-functional corner knife station
Service Instructions 755 A/756 A - 00.0 - 02/2019 177
19. Open the menu Service > Machine test > Test corner
knife > Adjust corner knife and enter the measured value in
order to correct the corner knife incision ( p. 373).
Setting the base corner
Information
The base corner varies with the needle distance.
The setting of the base corner is explained by example of the 10 mm
needle distance and must be defined in the same way for all other needle
distances.
Fig. 174: Testing and adjusting the corner knives electrically (5)
Base corner
Distance of the
outer corner knife edges