DURKOPP ADLER 756 A

Programming
Service Instructions 755 A/756 A - 00.0 - 02/2019 289
Naming a seam sequence
Fig. 274: Naming a seam sequence (1)
To enter a name for a seam sequence:
1. Press the button S02-S20 (depending on which seam sequence you
have selected).
 The display switches to a keypad.
Fig. 275: Naming a seam sequence (2)
2. Enter the desired sequence name.
You can enter up to 18 characters.
Every sequence must be given a name.
3. Confirm with OK.